| Subject: | 0.14 fails tests with CPAN install |
This module still won't install cleanly:
Checking if your kit is complete...
Looks good
Writing Makefile for Test::NoBreakpoints
Writing MYMETA.yml and MYMETA.json
cp lib/Test/NoBreakpoints.pm blib/lib/Test/NoBreakpoints.pm
Manifying blib/man3/Test::NoBreakpoints.3
JFITZ/Test-NoBreakpoints-0.14.tar.gz
/usr/bin/make -j 3 -j 3 -- OK
Running make test
PERL_DL_NONLAZY=1 /opt/xt/xt-perl/bin/perl "-MExtUtils::Command::MM"
"-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/baz/*.t
t/00-load.t ......................... ok
t/01_use.t .......................... ok
t/02_pod.t .......................... ok
# Failed test 'all perl files found'
# at t/04_all_perl_files.t line 41.
# Structures begin differing at:
# $got->[0] = './00-load.t'
# $expected->[0] = './01_use.t'
# Looks like you failed 1 test of 2.
t/04_all_perl_files.t ...............
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/2 subtests
t/05_no_breakpoints_ok.t ............ ok
# Failed test 'Test 'all_files_no_breakpoints_ok finds correct
breakpoints' result count'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: 13
# expected: 8
# Failed test 'subtest 'no breakpoint test of ./00-load.t' of
'all_files_no_breakpoints_ok finds correct breakpoints' compare name'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: 'no breakpoint test of ./00-load.t'
# expected: 'no breakpoint test of ./01_use.t'
# Failed test 'subtest 'no breakpoint test of ./01_use.t' of
'all_files_no_breakpoints_ok finds correct breakpoints' compare name'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: 'no breakpoint test of ./01_use.t'
# expected: 'no breakpoint test of ./02_pod.t'
# Failed test 'subtest 'no breakpoint test of ./02_pod.t' of
'all_files_no_breakpoints_ok finds correct breakpoints' compare name'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: 'no breakpoint test of ./02_pod.t'
# expected: 'no breakpoint test of ./04_all_perl_files.t'
# Failed test 'subtest 'no breakpoint test of ./04_all_perl_files.t'
of 'all_files_no_breakpoints_ok finds correct breakpoints' compare ok'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: '1'
# expected: '0'
# Failed test 'subtest 'no breakpoint test of ./04_all_perl_files.t'
of 'all_files_no_breakpoints_ok finds correct breakpoints' compare name'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: 'no breakpoint test of ./04_all_perl_files.t'
# expected: 'no breakpoint test of ./05_no_breakpoints_ok.t'
# Failed test 'subtest 'no breakpoint test of ./04_all_perl_files.t'
of 'all_files_no_breakpoints_ok finds correct breakpoints' compare diag'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# Got diag (0 bytes):
#
# Expected diag (61 bytes):
# 'breakpoint found in ./05_no_breakpoints_ok.t: $DB::signal =1'
# Failed test 'subtest 'no breakpoint test of
./05_no_breakpoints_ok.t' of 'all_files_no_breakpoints_ok finds correct
breakpoints' compare name'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: 'no breakpoint test of ./05_no_breakpoints_ok.t'
# expected: 'no breakpoint test of ./06_all_files_no_breakpoints_ok.t'
# Failed test 'subtest 'no breakpoint test of
./05_no_breakpoints_ok.t' of 'all_files_no_breakpoints_ok finds correct
breakpoints' compare diag'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# Got diag (61 bytes):
# 'breakpoint found in ./05_no_breakpoints_ok.t: $DB::signal =1'
# Expected diag (71 bytes):
# 'breakpoint found in ./06_all_files_no_breakpoints_ok.t: $DB::signal =1'
# Failed test 'subtest 'no breakpoint test of
./06_all_files_no_breakpoints_ok.t' of 'all_files_no_breakpoints_ok
finds correct breakpoints' compare name'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: 'no breakpoint test of ./06_all_files_no_breakpoints_ok.t'
# expected: 'no breakpoint test of ./baz/foo.t'
# Failed test 'subtest 'no breakpoint test of
./06_all_files_no_breakpoints_ok.t' of 'all_files_no_breakpoints_ok
finds correct breakpoints' compare diag'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# Got diag (71 bytes):
# 'breakpoint found in ./06_all_files_no_breakpoints_ok.t: $DB::signal =1'
# Expected diag (49 bytes):
# 'breakpoint found in ./baz/foo.t: $DB::signal = 1'
# Failed test 'subtest 'no breakpoint test of ./baz/foo.t' of
'all_files_no_breakpoints_ok finds correct breakpoints' compare name'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: 'no breakpoint test of ./baz/foo.t'
# expected: 'no breakpoint test of ./baz/gzonk/foo.pl'
# Failed test 'subtest 'no breakpoint test of ./baz/foo.t' of
'all_files_no_breakpoints_ok finds correct breakpoints' compare diag'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# Got diag (49 bytes):
# 'breakpoint found in ./baz/foo.t: $DB::signal = 1'
# Expected diag (56 bytes):
# 'breakpoint found in ./baz/gzonk/foo.pl: $DB::single = 2'
# Failed test 'subtest 'no breakpoint test of ./baz/gzonk/foo.pl' of
'all_files_no_breakpoints_ok finds correct breakpoints' compare ok'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: '0'
# expected: '1'
# Failed test 'subtest 'no breakpoint test of ./baz/gzonk/foo.pl' of
'all_files_no_breakpoints_ok finds correct breakpoints' compare name'
# at t/06_all_files_no_breakpoints_ok.t line 99.
# got: 'no breakpoint test of ./baz/gzonk/foo.pl'
# expected: 'no breakpoint test of ./baz/quux/Foo.pm'
# Looks like you failed 15 tests of 32.
t/06_all_files_no_breakpoints_ok.t ..
Dubious, test returned 15 (wstat 3840, 0xf00)
Failed 15/32 subtests
t/baz/foo.t ......................... skipped: just a placeholder
t/release-kwalitee.t ................ skipped: these tests are for
release candidate testing
t/release-no-tabs.t ................. skipped: these tests are for
release candidate testing
t/release-pod-coverage.t ............ skipped: these tests are for
release candidate testing
t/release-pod-syntax.t .............. skipped: these tests are for
release candidate testing
Test Summary Report
-------------------
t/04_all_perl_files.t (Wstat: 256 Tests: 2 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/06_all_files_no_breakpoints_ok.t (Wstat: 3840 Tests: 32 Failed: 15)
Failed tests: 3, 5, 8, 11, 13-14, 16, 18, 20, 22, 24
26, 28-30
Non-zero exit status: 15
Files=11, Tests=95, 1 wallclock secs ( 0.05 usr 0.04 sys + 0.32 cusr
0.07 csys = 0.48 CPU)
Result: FAIL
Failed 2/11 test programs. 16/95 subtests failed.
make: *** [test_dynamic] Error 255
JFITZ/Test-NoBreakpoints-0.14.tar.gz
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports JFITZ/Test-NoBreakpoints-0.14.tar.gz
Running make install
make test had returned bad status, won't install without force
Stopping: 'install' failed for 'Test::NoBreakpoints'.
Failed during this command:
JFITZ/Test-NoBreakpoints-0.14.tar.gz : make_test NO
cpan[5]> Warning: Configuration not saved.
Lockfile removed.