Skip Menu |

This queue is for tickets about the Fuse-Filesys-Virtual CPAN distribution.

Report information
The Basics
Id: 64231
Status: resolved
Priority: 0/
Queue: Fuse-Filesys-Virtual
People
Owner: TOSHIFJW [...] cpan.org
Requestors: SAUBER [...] cpan.org (email disabled for ticket)
Cc:
AdminCc:
Bug Information
Severity: Unimportant
Broken in: 0.02
Fixed in: (no value)

History Show all quoted text
  Sat Dec 25 20:01:24 2010 SAUBER [...] cpan.org - Ticket created
Subject: perl 5.12 Test Failure
Below is output when using cpan to install: --- CPAN.pm: Going to build T/TO/TOSHIFJW/Fuse-Filesys-Virtual-0.02.tar.gz Warning: Prerequisite 'Fuse::Class => 0' for 'TOSHIFJW/Fuse-Filesys-Virtual-0.02.tar.gz' failed when processing 'TOSHIFJW/Fuse-Class-0.01.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. cp lib/Fuse/Filesys/Virtual/FSWrapper.pm blib/lib/Fuse/Filesys/Virtual/FSWrapper.pm cp lib/Fuse/Filesys/Virtual.pm blib/lib/Fuse/Filesys/Virtual.pm cp lib/Fuse/Filesys/Virtual/HandleCache.pm blib/lib/Fuse/Filesys/Virtual/HandleCache.pm Manifying blib/man3/Fuse::Filesys::Virtual::FSWrapper.3pm Manifying blib/man3/Fuse::Filesys::Virtual::HandleCache.3pm Manifying blib/man3/Fuse::Filesys::Virtual.3pm TOSHIFJW/Fuse-Filesys-Virtual-0.02.tar.gz /usr/bin/make -- OK Running make test PERL_DL_NONLAZY=1 /opt/local/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load.t ............ 1/1 # Failed test 'use Fuse::Filesys::Virtual;' # at t/00-load.t line 6. # Tried to use 'Fuse::Filesys::Virtual'. # Error: Base class package "Fuse::Class" is empty. # (Perhaps you need to 'use' the module which defines that package first, # or make that module available in @INC (@INC contains: /Users/sauber/.cpan/build/Fuse- Filesys-Virtual-0.02-llp8sh/blib/lib /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/arch /opt/local/lib/perl5/site_perl/5.12.2/darwin-multi-2level /opt/local/lib/perl5/site_perl/5.12.2 /opt/local/lib/perl5/vendor_perl/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/vendor_perl/5.12.2 /opt/local/lib/perl5/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/5.12.2). # at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41 # BEGIN failed--compilation aborted at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual- 0.02-llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41. # Compilation failed in require at (eval 4) line 2. # BEGIN failed--compilation aborted at (eval 4) line 2. Use of uninitialized value $Fuse::Filesys::Virtual::VERSION in concatenation (.) or string at t/00-load.t line 9. # Testing Fuse::Filesys::Virtual , Perl 5.012002, /opt/local/bin/perl # Looks like you failed 1 test of 1. t/00-load.t ............ Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/plain-lock.t ......... Base class package "Fuse::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/sauber/.cpan/build/Fuse- Filesys-Virtual-0.02-llp8sh/blib/lib /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/arch /opt/local/lib/perl5/site_perl/5.12.2/darwin-multi-2level /opt/local/lib/perl5/site_perl/5.12.2 /opt/local/lib/perl5/vendor_perl/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/vendor_perl/5.12.2 /opt/local/lib/perl5/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/5.12.2 .). at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41 BEGIN failed--compilation aborted at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41. Compilation failed in require at t/plain-lock.t line 15. BEGIN failed--compilation aborted at t/plain-lock.t line 15. # Looks like your test exited with 2 before it could output anything. t/plain-lock.t ......... Dubious, test returned 2 (wstat 512, 0x200) Failed 15/15 subtests t/plain-notseekable.t .. Base class package "Fuse::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/sauber/.cpan/build/Fuse- Filesys-Virtual-0.02-llp8sh/blib/lib /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/arch /opt/local/lib/perl5/site_perl/5.12.2/darwin-multi-2level /opt/local/lib/perl5/site_perl/5.12.2 /opt/local/lib/perl5/vendor_perl/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/vendor_perl/5.12.2 /opt/local/lib/perl5/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/5.12.2 .). at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41 BEGIN failed--compilation aborted at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41. Compilation failed in require at t/plain-notseekable.t line 15. BEGIN failed--compilation aborted at t/plain-notseekable.t line 15. # Looks like your test exited with 2 before it could output anything. t/plain-notseekable.t .. Dubious, test returned 2 (wstat 512, 0x200) Failed 11/11 subtests t/plain-rename.t ....... Base class package "Fuse::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/sauber/.cpan/build/Fuse- Filesys-Virtual-0.02-llp8sh/blib/lib /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/arch /opt/local/lib/perl5/site_perl/5.12.2/darwin-multi-2level /opt/local/lib/perl5/site_perl/5.12.2 /opt/local/lib/perl5/vendor_perl/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/vendor_perl/5.12.2 /opt/local/lib/perl5/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/5.12.2 .). at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41 BEGIN failed--compilation aborted at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41. Compilation failed in require at t/plain-rename.t line 15. BEGIN failed--compilation aborted at t/plain-rename.t line 15. # Looks like your test exited with 2 before it could output anything. t/plain-rename.t ....... Dubious, test returned 2 (wstat 512, 0x200) Failed 13/13 subtests t/plain.t .............. Base class package "Fuse::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/sauber/.cpan/build/Fuse- Filesys-Virtual-0.02-llp8sh/blib/lib /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/arch /opt/local/lib/perl5/site_perl/5.12.2/darwin-multi-2level /opt/local/lib/perl5/site_perl/5.12.2 /opt/local/lib/perl5/vendor_perl/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/vendor_perl/5.12.2 /opt/local/lib/perl5/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/5.12.2 .). at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41 BEGIN failed--compilation aborted at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41. Compilation failed in require at t/plain.t line 13. BEGIN failed--compilation aborted at t/plain.t line 13. # Looks like your test exited with 2 before it could output anything. t/plain.t .............. Dubious, test returned 2 (wstat 512, 0x200) Failed 30/30 subtests t/pod-coverage.t ....... skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/pod.t ................ ok t/unimpl.t ............. Base class package "Fuse::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/sauber/.cpan/build/Fuse- Filesys-Virtual-0.02-llp8sh/blib/lib /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/arch /opt/local/lib/perl5/site_perl/5.12.2/darwin-multi-2level /opt/local/lib/perl5/site_perl/5.12.2 /opt/local/lib/perl5/vendor_perl/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/vendor_perl/5.12.2 /opt/local/lib/perl5/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/5.12.2 .). at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41 BEGIN failed--compilation aborted at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41. Compilation failed in require at t/unimpl.t line 8. BEGIN failed--compilation aborted at t/unimpl.t line 8. # Looks like your test exited with 2 before it could output anything. t/unimpl.t ............. Dubious, test returned 2 (wstat 512, 0x200) Failed 25/25 subtests t/unsupported.t ........ Base class package "Fuse::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/sauber/.cpan/build/Fuse- Filesys-Virtual-0.02-llp8sh/blib/lib /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/arch /opt/local/lib/perl5/site_perl/5.12.2/darwin-multi-2level /opt/local/lib/perl5/site_perl/5.12.2 /opt/local/lib/perl5/vendor_perl/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/vendor_perl/5.12.2 /opt/local/lib/perl5/5.12.2/darwin-multi- 2level /opt/local/lib/perl5/5.12.2 .). at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41 BEGIN failed--compilation aborted at /Users/sauber/.cpan/build/Fuse-Filesys-Virtual-0.02- llp8sh/blib/lib/Fuse/Filesys/Virtual.pm line 41. Compilation failed in require at t/unsupported.t line 8. BEGIN failed--compilation aborted at t/unsupported.t line 8. # Looks like your test exited with 2 before it could output anything. t/unsupported.t ........ Dubious, test returned 2 (wstat 512, 0x200) Failed 3/3 subtests Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/plain-lock.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 15 tests but ran 0. t/plain-notseekable.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 11 tests but ran 0. t/plain-rename.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 13 tests but ran 0. t/plain.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 30 tests but ran 0. t/unimpl.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 25 tests but ran 0. t/unsupported.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 3 tests but ran 0. Files=9, Tests=4, 1 wallclock secs ( 0.05 usr 0.04 sys + 0.41 cusr 0.08 csys = 0.58 CPU) Result: FAIL Failed 7/9 test programs. 1/4 subtests failed. make: *** [test_dynamic] Error 2 TOSHIFJW/Fuse-Filesys-Virtual-0.02.tar.gz /usr/bin/make test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports TOSHIFJW/Fuse-Filesys-Virtual-0.02.tar.gz Running make install make test had returned bad status, won't install without force
  Tue Aug 15 18:30:20 2017 TOSHIFJW [...] cpan.org - Taken
  Tue Aug 15 18:33:08 2017 TOSHIFJW [...] cpan.org - Correspondence added
Test of Fuse::Class may pass at version 0.03
  Tue Aug 15 18:33:08 2017 The RT System itself - Status changed from 'new' to 'open'
  Tue Aug 15 18:33:08 2017 TOSHIFJW [...] cpan.org - Status changed from 'open' to 'resolved'