| Subject: | test failure |
config-edit-command.t works when run isolated, but fails when running
the whole test suite:
[guillomovitch@n2 Config-Model-1.223]$ ./Build test verbose=1
...
t/config-edit-command.t ....
1..5
not ok 1 - exit_is_num: /usr/bin/perl5.12.2
-I/usr/lib/perl5/site_perl/5.12.2/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.12.2
-I/usr/lib/perl5/vendor_perl/5.12.2/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.12.2
-I/usr/lib/perl5/5.12.2/i386-linux-thread-multi -I/usr/lib/perl5/5.12.2
-I/usr/lib/perl5/site_perl/5.12.1
-I/usr/lib/perl5/site_perl/5.12.1/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.12.0
-I/usr/lib/perl5/site_perl/5.12.0/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.10.1 -I/usr/lib/perl5/site_perl/5.10.0
-I/usr/lib/perl5/site_perl -I/usr/lib/perl5/vendor_perl/5.12.1
-I/usr/lib/perl5/vendor_perl/5.12.1/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.12.0
-I/usr/lib/perl5/vendor_perl/5.12.0/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.10.1 -I/usr/lib/perl5/vendor_perl/5.10.0
-I/usr/lib/perl5/vendor_perl/5.8.8 -I/usr/lib/perl5/vendor_perl -I.
-Ilib config-edit -appli popcon -ui none PARITICIPATE=yes, 2
# Failed test 'exit_is_num: /usr/bin/perl5.12.2
-I/usr/lib/perl5/site_perl/5.12.2/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.12.2
-I/usr/lib/perl5/vendor_perl/5.12.2/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.12.2
-I/usr/lib/perl5/5.12.2/i386-linux-thread-multi -I/usr/lib/perl5/5.12.2
-I/usr/lib/perl5/site_perl/5.12.1
-I/usr/lib/perl5/site_perl/5.12.1/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.12.0
-I/usr/lib/perl5/site_perl/5.12.0/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.10.1 -I/usr/lib/perl5/site_perl/5.10.0
-I/usr/lib/perl5/site_perl -I/usr/lib/perl5/vendor_perl/5.12.1
-I/usr/lib/perl5/vendor_perl/5.12.1/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.12.0
-I/usr/lib/perl5/vendor_perl/5.12.0/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.10.1 -I/usr/lib/perl5/vendor_perl/5.10.0
-I/usr/lib/perl5/vendor_perl/5.8.8 -I/usr/lib/perl5/vendor_perl -I.
-Ilib config-edit -appli popcon -ui none PARITICIPATE=yes, 2'
# at t/config-edit-command.t line 22.
# got: 255
# expected: 2
not ok 2 - check auto_read_error
# Failed test 'check auto_read_error'
# at t/config-edit-command.t line 23.
# 'Bareword "Config::Model::available_models" not
allowed while "strict subs" in use at config-edit line 316.
# Execution of config-edit aborted due to compilation errors.
# '
# doesn't match '(?-xism:auto_read error)'
ok 3 - exit_is_num: /usr/bin/perl5.12.2
-I/usr/lib/perl5/site_perl/5.12.2/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.12.2
-I/usr/lib/perl5/vendor_perl/5.12.2/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.12.2
-I/usr/lib/perl5/5.12.2/i386-linux-thread-multi -I/usr/lib/perl5/5.12.2
-I/usr/lib/perl5/site_perl/5.12.1
-I/usr/lib/perl5/site_perl/5.12.1/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.12.0
-I/usr/lib/perl5/site_perl/5.12.0/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.10.1 -I/usr/lib/perl5/site_perl/5.10.0
-I/usr/lib/perl5/site_perl -I/usr/lib/perl5/vendor_perl/5.12.1
-I/usr/lib/perl5/vendor_perl/5.12.1/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.12.0
-I/usr/lib/perl5/vendor_perl/5.12.0/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.10.1 -I/usr/lib/perl5/vendor_perl/5.10.0
-I/usr/lib/perl5/vendor_perl/5.8.8 -I/usr/lib/perl5/vendor_perl -I.
-Ilib config-edit -root_dir wr_root/popcon1 -appli popcon -ui none
PARITICIPATE=yes, 255
not ok 4 - check unknown element
# Failed test 'check unknown element'
# at t/config-edit-command.t line 40.
# 'Bareword "Config::Model::available_models" not
allowed while "strict subs" in use at config-edit line 316.
# Execution of config-edit aborted due to compilation errors.
# '
# doesn't match '(?-xism:unknown element)'
not ok 5 - exit_is_num: /usr/bin/perl5.12.2
-I/usr/lib/perl5/site_perl/5.12.2/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.12.2
-I/usr/lib/perl5/vendor_perl/5.12.2/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.12.2
-I/usr/lib/perl5/5.12.2/i386-linux-thread-multi -I/usr/lib/perl5/5.12.2
-I/usr/lib/perl5/site_perl/5.12.1
-I/usr/lib/perl5/site_perl/5.12.1/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.12.0
-I/usr/lib/perl5/site_perl/5.12.0/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.10.1 -I/usr/lib/perl5/site_perl/5.10.0
-I/usr/lib/perl5/site_perl -I/usr/lib/perl5/vendor_perl/5.12.1
-I/usr/lib/perl5/vendor_perl/5.12.1/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.12.0
-I/usr/lib/perl5/vendor_perl/5.12.0/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.10.1 -I/usr/lib/perl5/vendor_perl/5.10.0
-I/usr/lib/perl5/vendor_perl/5.8.8 -I/usr/lib/perl5/vendor_perl -I.
config-edit -root_dir wr_root/popcon1 -ui none -appli popcon
PARTICIPATE=yes, 0
# Failed test 'exit_is_num: /usr/bin/perl5.12.2
-I/usr/lib/perl5/site_perl/5.12.2/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.12.2
-I/usr/lib/perl5/vendor_perl/5.12.2/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.12.2
-I/usr/lib/perl5/5.12.2/i386-linux-thread-multi -I/usr/lib/perl5/5.12.2
-I/usr/lib/perl5/site_perl/5.12.1
-I/usr/lib/perl5/site_perl/5.12.1/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.12.0
-I/usr/lib/perl5/site_perl/5.12.0/i386-linux-thread-multi
-I/usr/lib/perl5/site_perl/5.10.1 -I/usr/lib/perl5/site_perl/5.10.0
-I/usr/lib/perl5/site_perl -I/usr/lib/perl5/vendor_perl/5.12.1
-I/usr/lib/perl5/vendor_perl/5.12.1/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.12.0
-I/usr/lib/perl5/vendor_perl/5.12.0/i386-linux-thread-multi
-I/usr/lib/perl5/vendor_perl/5.10.1 -I/usr/lib/perl5/vendor_perl/5.10.0
-I/usr/lib/perl5/vendor_perl/5.8.8 -I/usr/lib/perl5/vendor_perl -I.
config-edit -root_dir wr_root/popcon1 -ui none -appli popcon
PARTICIPATE=yes, 0'
# at t/config-edit-command.t line 44.
# got: 255
# expected: 0
# Looks like you failed 4 tests of 5.
Dubious, test returned 4 (wstat 1024, 0x400)
This is perl 5.12.2, on mandriva Linux cooker.