| Subject: | Tests fail on install |
Unable to install due to test failures:
cpan[2]> install Devel::StackTrace
Running install for module 'Devel::StackTrace'
Running make for D/DR/DROLSKY/Devel-StackTrace-1.21.tar.gz
Has already been unwrapped into directory
/root/.cpan/build/Devel-StackTrace-1.21-DUGWBg
Has already been made
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-basic.t ...... 1/40 Operation `""': no method found, argument in
overloaded package CodeOverload at /usr/lib/perl5/5.8.5/overload.pm line 97.
# Looks like you planned 40 tests but ran 36.
# Looks like your test exited with 255 just after 36.
t/01-basic.t ...... Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/40 subtests
t/02-bad-utf8.t ... skipped: These tests require Perl 5.8.8+
t/kwalitee.t ...... skipped: This test is only run for the module author
t/pod-coverage.t .. skipped: This test is only run for the module author
t/pod.t ........... skipped: This test is only run for the module author
Test Summary Report
-------------------
t/01-basic.t (Wstat: 65280 Tests: 36 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 40 tests but ran 36.
Files=5, Tests=36, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.12 cusr
0.02 csys = 0.18 CPU)
Result: FAIL
Failed 1/5 test programs. 0/36 subtests failed.
make: *** [test_dynamic] Error 255
DROLSKY/Devel-StackTrace-1.21.tar.gz
/usr/bin/make test -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports DROLSKY/Devel-StackTrace-1.21.tar.gz
Running make install
make test had returned bad status, won't install without force
Failed during this command:
DROLSKY/Devel-StackTrace-1.21.tar.gz : make_test NO
Perl is:
Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
Platform:
osname=linux, osvers=2.6.9-67.0.7.elsmp,
archname=x86_64-linux-thread-multi
uname='linux ls20-bc1-14.build.redhat.com 2.6.9-67.0.7.elsmp #1 smp
wed feb 27 04:47:23 est 2008 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -m64 -Dversion=5.8.5
-Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red
Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Dlibpth=/usr/local/lib64
/lib64 /usr/lib64 -Dprivlib=/usr/lib/perl5/5.8.5
-Dsitelib=/usr/lib/perl5/site_perl/5.8.5
-Dvendorlib=/usr/lib/perl5/vendor_perl/5.8.5
-Darchlib=/usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi
-Dsitearch=/usr/lib64/perl5/site_perl/5.8.5/x86_64-linux-thread-multi
-Dvendorarch=/usr/lib64/perl5/vendor_perl/5.8.5/x86_64-linux-thread-multi -Darchname=x86_64-linux
-Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads
-Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db
-Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio
-Dinstallusrbinperl -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less
-isr -Dinc_version_list=5.8.4 5.8.3 5.8.2 5.8.1 5.8.0'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-O2 -g -pipe -m64',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING
-fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm'
ccversion='', gccversion='3.4.6 20060404 (Red Hat 3.4.6-9)',
gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =''
libpth=/usr/local/lib64 /lib64 /usr/lib64
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.3.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.4'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi/CORE'
cccdlflags='-fPIC', lddlflags='-shared'
Characteristics of this binary (from libperl):
Compile-time options: DEBUGGING MULTIPLICITY USE_ITHREADS
USE_64_BIT_INT USE_64_BIT_ALL USE_LARGE_FILES PERL_IMPLICIT_CONTEXT
Built under linux
Compiled at Jun 5 2008 07:33:01
@INC:
/usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi
/usr/lib/perl5/5.8.5
/usr/lib64/perl5/site_perl/5.8.5/x86_64-linux-thread-multi
/usr/lib64/perl5/site_perl/5.8.4/x86_64-linux-thread-multi
/usr/lib64/perl5/site_perl/5.8.3/x86_64-linux-thread-multi
/usr/lib64/perl5/site_perl/5.8.2/x86_64-linux-thread-multi
/usr/lib64/perl5/site_perl/5.8.1/x86_64-linux-thread-multi
/usr/lib64/perl5/site_perl/5.8.0/x86_64-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl/5.8.4
/usr/lib/perl5/site_perl/5.8.3
/usr/lib/perl5/site_perl/5.8.2
/usr/lib/perl5/site_perl/5.8.1
/usr/lib/perl5/site_perl/5.8.0
/usr/lib/perl5/site_perl
/usr/lib64/perl5/vendor_perl/5.8.5/x86_64-linux-thread-multi
/usr/lib64/perl5/vendor_perl/5.8.4/x86_64-linux-thread-multi
/usr/lib64/perl5/vendor_perl/5.8.3/x86_64-linux-thread-multi
/usr/lib64/perl5/vendor_perl/5.8.2/x86_64-linux-thread-multi
/usr/lib64/perl5/vendor_perl/5.8.1/x86_64-linux-thread-multi
/usr/lib64/perl5/vendor_perl/5.8.0/x86_64-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl/5.8.4
/usr/lib/perl5/vendor_perl/5.8.3
/usr/lib/perl5/vendor_perl/5.8.2
/usr/lib/perl5/vendor_perl/5.8.1
/usr/lib/perl5/vendor_perl/5.8.0
/usr/lib/perl5/vendor_perl
.