| Subject: | 1.50 has 3 failures on VMS |
I haven't had chance to dig into these at all, so for now this is just a bug report. I'm seeing
the same failures in blead@33508, but the output below is from building EU::Install 1.50
against maint-5.8@33522.
$ mmk/macro=test_verbose=1 test
MCR dsa0:[craig.perl-5_8]ndbgperl.exe "-I[.lib]" "-MExtUtils::Command::MM" "-e"
"test_harness(1, '[.blib.lib]', '[.blib.arch]')" t/*
.t
t/basic............
1..55
ok 1 - setup
ok 2 - chdir'd to Big-Dummy
ok 3 - Makefile.PL exited with zero
ok 4 - Makefile.PL output looks right
ok 5 - Makefile.PL run in package main
ok 6 - Makefile exists
ok 7 - its been touched
ok 8 - make manifest created a MANIFEST
ok 9 - its not empty
ok 10 - make test
ok 11 - exited normally
ok 12 - TEST_VERBOSE
ok 13 - successful
ok 14 - exited normally
ok 15 - install
ok 16
ok 17
ok 18 - install dir created
ok 19 - Dummy.pm installed
ok 20 - Liar.pm installed
ok 21 - program installed
ok 22 - packlist created
ok 23 - perllocal.pod created
ok 24 # skip VMS install targets do not preserve $(PREFIX)
ok 25 # skip VMS install targets do not preserve $(PREFIX)
ok 26 # skip VMS install targets do not preserve $(PREFIX)
ok 27 # skip VMS install targets do not preserve $(PREFIX)
ok 28 # skip VMS install targets do not preserve $(PREFIX)
ok 29 # skip VMS install targets do not preserve $(PREFIX)
ok 30 # skip VMS install targets do not preserve $(PREFIX)
ok 31 # skip VMS install targets do not preserve $(PREFIX)
ok 32 # skip VMS install targets do not preserve $(PREFIX)
ok 33 # skip VMS install targets do not preserve $(DESTDIR)
ok 34 # skip VMS install targets do not preserve $(DESTDIR)
ok 35 # skip VMS install targets do not preserve $(DESTDIR)
ok 36 # skip VMS install targets do not preserve $(DESTDIR)
ok 37 # skip VMS install targets do not preserve $(DESTDIR)
ok 38 # skip VMS install targets do not preserve $(DESTDIR)
ok 39 # skip VMS install targets do not preserve $(DESTDIR)
ok 40 # skip VMS install targets do not preserve $(DESTDIR)
ok 41 # skip VMS install targets do not preserve $(DESTDIR)
ok 42 # skip VMS install targets do not preserve $(DESTDIR)
ok 43 # skip VMS install targets do not preserve $(DESTDIR)
ok 44 # skip VMS install targets do not preserve $(PREFIX)
ok 45 # skip VMS install targets do not preserve $(PREFIX)
ok 46 # skip VMS install targets do not preserve $(PREFIX)
ok 47 # skip VMS install targets do not preserve $(PREFIX)
ok 48 # skip VMS install targets do not preserve $(PREFIX)
ok 49 # skip VMS install targets do not preserve $(PREFIX)
ok 50 # skip VMS install targets do not preserve $(PREFIX)
ok 51 # skip VMS install targets do not preserve $(PREFIX)
ok 52 # skip VMS install targets do not preserve $(PREFIX)
ok 53 # skip VMS install targets do not preserve $(PREFIX)
ok 54
ok 55 - teardown
ok
30/55 skipped: various reasons
t/can_write_dir....
ok 1
ok 2
ok 3
not ok 4
# Failed test at t/can_write_dir.t line 29.
# Structures begin differing at:
# $got->[0] = '0'
# $expected->[0] = '1'
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
1..12
# Looks like you failed 1 test of 12.
%SYSTEM-F-ABORT, abort
%SYSTEM-F-ABORT, abort
dubious
Test returned status 44 (wstat 1024, 0x400)
(VMS status is 44)
DIED. FAILED test 4
Failed 1/12 tests, 91.67% okay
t/install..........
1..52
ok 1 - use ExtUtils::Install;
ok 2 - main->can('install')
ok 3 - main->can('uninstall')
ok 4 - main->can('pm_to_blib')
ok 5 - main->can('install_default')
ok 6 - setup
ok 7 - pm_to_blib created blib dir
ok 8 - copied .pm file
ok 9 - created autosplit dir
ok 10
ok 11 - second run, blib dir still there
ok 12 - .pm file still there
ok 13 - autosplit still there
ok 14
ok 15 - install made dir (dry run)
ok 16 - .pm file installed (dry run)
ok 17 - packlist exists (dry run)
ok 18 - install made dir
ok 19 - .pm file installed
ok 20 - ignored .SKIP file
ok 21 - packlist exists
ok 22
ok 23 - packlist written
ok 24 - install made other dir
ok 25 - .pm file installed
ok 26 - packlist exists
ok 27 - UNINST=1 preserved same
ok 28 - different install exists
ok 29 - install made other dir
ok 30 - .pm file installed
ok 31 - packlist exists
ok 32 - UNINST=0 left different
ok 33 - different install exists
ok 34 - we didnt die
not ok 35 - we did warn
# Failed test ' we did warn'
# in t/install.t at line 146.
ok 36 - install made other dir
ok 37 - .pm file installed
ok 38 - packlist exists
not ok 39 - UNINST=1 failed to remove different
# Failed test ' UNINST=1 failed to remove different'
# in t/install.t at line 150.
not ok 40 - different install exists
# Failed test 'different install exists'
# in t/install.t at line 160.
not ok 41 - we did die
# Failed test ' we did die'
# in t/install.t at line 171.
ok 42 - we didnt warn
ok 43 - install made other dir
ok 44 - .pm file installed
ok 45 - packlist exists
not ok 46 - UNINST=1 failed to remove different
# Failed test ' UNINST=1 failed to remove different'
# in t/install.t at line 176.
ok 47 - install made other dir
ok 48 - .pm file installed
ok 49 - packlist exists
ok 50 - UNINST=1 removed different
ok 51
ok 52 - teardown
# Looks like you failed 5 tests of 52.
%SYSTEM-F-ABORT, abort
%SYSTEM-F-ABORT, abort
dubious
Test returned status 44 (wstat 1024, 0x400)
(VMS status is 44)
DIED. FAILED tests 35, 39-41, 46
Failed 5/52 tests, 90.38% okay
t/installapi2......
1..70
ok 1 - use ExtUtils::Install;
ok 2 - main->can('install')
ok 3 - main->can('uninstall')
ok 4 - main->can('pm_to_blib')
ok 5 - main->can('install_default')
ok 6 - setup
ok 7 - pm_to_blib created blib dir
ok 8 - copied .pm file
ok 9 - created autosplit dir
ok 10
ok 11 - second run, blib dir still there
ok 12 - .pm file still there
ok 13 - autosplit still there
ok 14
ok 15 - install made dir (dry run)
ok 16 - .pm file installed (dry run)
ok 17 - packlist exists (dry run)
ok 18 - install made dir
ok 19 - .pm file installed
ok 20 - ignored .SKIP file
ok 21 - packlist exists
ok 22
ok 23 - packlist written
ok 24 - install made other dir
ok 25 - .pm file installed
ok 26 - packlist exists
ok 27 - UNINST=1 preserved same
ok 28 - different install exists
ok 29 - install made other dir
ok 30 - .pm file installed
ok 31 - packlist exists
ok 32 - UNINST=0 left different
ok 33 - different install exists
ok 34 - we didnt die
not ok 35 - we did warn
# Failed test ' we did warn'
# in t/installapi2.t at line 145.
ok 36 - install made other dir
ok 37 - .pm file installed
ok 38 - packlist exists
not ok 39 - UNINST=1 failed to remove different
# Failed test ' UNINST=1 failed to remove different'
# in t/installapi2.t at line 149.
not ok 40 - different install exists
# Failed test 'different install exists'
# in t/installapi2.t at line 159.
not ok 41 - we did die
# Failed test ' we did die'
# in t/installapi2.t at line 169.
ok 42 - we didnt warn
ok 43 - install made other dir
ok 44 - .pm file installed
ok 45 - packlist exists
not ok 46 - UNINST=1 failed to remove different
# Failed test ' UNINST=1 failed to remove different'
# in t/installapi2.t at line 174.
not ok 47 - different install exists
# Failed test 'different install exists'
# in t/installapi2.t at line 181.
ok 48 - install made other dir
ok 49 - .pm file installed
ok 50 - packlist exists
ok 51 - UNINST=1 removed different
ok 52 - install file already exists
ok 53 - source file already exists
ok 54 - Times are different
ok 55 - install made other dir
ok 56 - .pm file installed
ok 57 - packlist exists
not ok 58 - Times are same
# Failed test ' Times are same'
# in t/installapi2.t at line 211.
ok 59 - $result{install_unchanged} should be empty
ok 60 - install file already exists
ok 61 - source file already exists
ok 62 - Times are different
ok 63 - install made other dir
ok 64 - .pm file installed
ok 65 - packlist exists
ok 66 - Times are different
ok 67 - nothing should have been installed
ok 68 - install_unchanged should be populated
ok 69
ok 70 - teardown
# Looks like you failed 7 tests of 70.
%SYSTEM-F-ABORT, abort
%SYSTEM-F-ABORT, abort
dubious
Test returned status 44 (wstat 1024, 0x400)
(VMS status is 44)
DIED. FAILED tests 35, 39-41, 46-47, 58
Failed 7/70 tests, 90.00% okay
t/packlist.........
1..34
ok 1 - use ExtUtils::Packlist;
ok 2 - mkfh() should return a FH
ok 3 - The object isa ExtUtils::Packlist
ok 4 - obj should be tied underneath
ok 5 - TIEHASH() should bless into class
ok 6 - TIEHASH() should store packfile name
ok 7 - STORE() should stuff stuff in data member
ok 8 - check FETCH()
ok 9 - FIRSTKEY() should be consistent
ok 10 - and NEXTKEY() should also be consistent
ok 11 - EXISTS() should find keys
ok 12 - DELETE() should delete cleanly
ok 13 - CLEAR() should wipe out data
ok 14 - ExtUtils::Packlist->can('DESTROY')
ok 15 - write() should croak without packfile
ok 16 - write() can write a file
ok 17 - write() should croak on open failure
ok 18 - write() should normally succeed
ok 19 - write() should set packfile name
ok 20 - read() should croak without packfile
ok 21 - read() should croak with bad packfile name
ok 22 - key with value should be available
ok 23 - key with no value should also be present
ok 24 - key with hash value should be present
ok 25 - second embedded hash value should appear
ok 26 - read() should normally succeed
ok 27 - single keys should have undef value
ok 28 - multivalue keys should become hashes
ok 29 - hash values should be set
ok 30 - read() should resolve /./ to / in keys
ok 31 - validate() should find missing files
ok 32 - validate() should remove missing files when prompted
ok 33 - packlist_file() should fetch packlist from passed hash
ok 34 - packlist_file() should fetch packlist from ExtUtils::Packlist object
ok
t/pod-coverage.....
1..0 # Skip Skipping author tests. Set AUTHOR_TESTING=1 to run them.
skipped
all skipped: Skipping author tests. Set AUTHOR_TESTING=1 to run them.
t/pod..............
1..0 # Skip Test::Pod 1.14 required for testing POD
skipped
all skipped: Test::Pod 1.14 required for testing POD
Failed Test Stat Wstat Total Fail List of Failed
-----------------------------------------------------------------------
--------
t/can_write_dir.t 44 1024 12 1 4
t/install.t 44 1024 52 5 35 39-41 46
t/installapi2.t 44 1024 70 7 35 39-41 46-47 58
2 tests and 30 subtests skipped.
Failed 3/7 test scripts. 13/223 subtests failed.
Files=7, Tests=223, 129 wallclock secs ( 0.00 cusr + 0.00 csys = 0.00 CPU)
Failed 3/7 test programs. 13/223 subtests failed.
%SYSTEM-F-ABORT, abort
%MMK-F-ERRUPD, error status %X0000002C occurred when updating target TEST_DYNAMIC