Skip Menu |

This queue is for tickets about the POE-Component-AIO CPAN distribution.

Report information
The Basics
Id: 27583
Status: rejected
Priority: 0/
Queue: POE-Component-AIO
People
Owner: Nobody in particular
Requestors: Anonymous (no email address)
Cc:
AdminCc:
Bug Information
Severity: (no value)
Broken in: (no value)
Fixed in: (no value)

History Show all quoted text
  Thu Jun 14 12:36:30 2007 Anonymous - Ticket created
Subject: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 14:55:09 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous <cripto [...] ecn.org>
after simply doing "use POE::Component::AIO", i can now longer do a clean 'perl -c' to check my script syntax. i now get this: Sessions were started, but POE::Kernel's run() method was never called to execute them. This usually happens because an error occurred before POE::Kernel->run() could be called. Please fix any errors above this notice, and be sure that POE::Kernel->run() is called.
  Thu Jun 14 12:41:38 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 18:36:36 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 12:41:40 2007 The RT System itself - Status changed from 'new' to 'open'
  Thu Jun 14 12:47:10 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 18:41:43 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 12:50:49 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 18:47:14 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 13:03:17 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 18:51:07 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 13:08:21 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 19:03:21 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 13:13:39 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 19:08:28 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 13:43:17 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 19:13:49 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 13:47:48 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 19:43:20 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 13:58:45 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 19:47:54 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:03:58 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 19:58:49 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:04:33 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:04:03 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:05:05 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:04:44 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:05:28 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:05:10 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:06:03 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:05:32 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:06:24 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:06:06 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:07:06 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:06:30 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:07:44 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:07:09 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:08:14 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:07:48 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:10:22 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:08:19 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:13:40 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:10:25 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:15:18 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:13:43 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:19:55 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:15:23 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:37:58 2007 xantus+cpan [...] xantus.org - Correspondence added
From: XANTUS [...] cpan.org
On Thu Jun 14 12:36:30 2007, cripto@ecn.org wrote: Show quoted text
> after simply doing "use POE::Component::AIO", i can now longer > do a clean 'perl -c' to check my script syntax. i now get this: > > Sessions were started, but POE::Kernel's run() method was never > called to execute them. This usually happens because an error > occurred before POE::Kernel->run() could be called. Please fix > any errors above this notice, and be sure that POE::Kernel->run() > is called.
I'll add a note in the docs about this. Here is how you fix it: change your use line to this: use POE::Component::AIO { no_auto_bootstrap => 1 }; then call POE::Component::AIO->new(); in your _start of your poe app.
  Thu Jun 14 14:38:31 2007 xantus+cpan [...] xantus.org - Status changed from 'open' to 'rejected'
  Thu Jun 14 14:38:36 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:38:01 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:38:41 2007 The RT System itself - Status changed from 'rejected' to 'open'
  Thu Jun 14 14:39:06 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:38:43 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:39:24 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:39:09 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:39:45 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:39:26 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:40:09 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:39:48 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:40:28 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:40:12 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:40:48 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:40:32 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:41:13 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:40:50 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:41:41 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:41:15 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:42:24 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:41:44 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:46:22 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:20:14 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:47:17 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:46:27 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:48:00 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:47:21 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:48:39 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:48:04 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:53:52 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:48:42 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:54:21 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:53:58 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:54:52 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:54:28 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:55:18 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:54:58 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:55:43 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:55:24 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:56:06 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:55:49 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 14:56:32 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:56:12 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 15:18:59 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] AutoReply: cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:56:36 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Thu Jun 14 15:19:15 2007 anon [...] ecn.org - Correspondence added
Subject: Re: [rt.cpan.org #27583] cannot cleanly run perl -c after using this module
Date: Thu, 14 Jun 2007 20:42:28 +0200 (CEST)
To: bug-POE-Component-AIO [...] rt.cpan.org
From: Anonymous Remailer <anon [...] ecn.org>
You are recieving this message in response to your mail to <cripto@ecn.org>. You have replied to an anonymous message. It is not possible to contact the original sender. If you do not want to receive anonymous mail, send a message containing the line destination-block bug-POE-Component-AIO@rt.cpan.org to <anon@ecn.org>. You can simply hit `reply' and send back this entire message. For more information about the remailer, send <anon@ecn.org> a message with subject "remailer-help". You can reach the operator at <cripto_abuse@ecn.org>. -- anon@ecn.org
  Fri Nov 09 17:24:42 2007 xantus+cpan [...] xantus.org - Correspondence added
Removing ticket.
  Fri Nov 09 17:24:44 2007 xantus+cpan [...] xantus.org - Status changed from 'open' to 'rejected'